Ingredients
- two ounces of white vitriol to four gallons of water
- eight pounds of whiting
- a pound of white glue in water
- four gallons of water
Directions
1
To whiten walls, scrape off all the old whitewash, and wash the walls with a solution of two ounces of white vitriol to four gallons of water. Soak a quarter of a pound of white glue in water for twelve hours; strain and place in a tin pail in a kettle of boiling water. When melted, stir in the glue eight pounds of whiting and water enough to make it as thick as common whitewash. Apply evenly with a good brush. If the walls are very yellow, blue the water slightly by squeezing in it a flannel blue-bag.
2
Before kalsomining a wall all cracks should be plastered over. Use plaster of Paris. Kalsomine may be colored easily by mixing with it yellow ochre, Spanish brown, indigo; squeeze through a bag into the water, etc.
By F. L. Gillette and Hugo Ziemann ·
Recipe sourced from
gutenberg